Buffalo Technology Buffalo AirStation G54 WLA-G54C - Manual (Page 12)

11
Installation / Setup
4.3.2 Name and Password
AirStation name - Select a unique name to
make it easier to identify each AirStation.
Administrator name - “root”, cannot be
changed
Administrator password - Allows the
administrator to enter an administrator pass-
word to restrict access to the setting screens.
Enter new password. Enter up to eight alpha-
numeric characters (case sensitive) and confi rm
password
■ Note: If password is forgotten or misplaced, The WLA-G54C can be returned to all the factory default
settings by holding down the INIT button on the back of the unit for three seconds.
4.3.3 Time setup
Time setup - Enter the current date and time,
and click
Set.
NTP - Select Use or Do not use.
■ Note: If NTP is used, time is set au to mat i cal ly.
NTP server name - Enter the NTP server
name
Check Interval - Enter the time interval for time
check frequency
Time Zone - Select local time zone
Click
Set.
4.3.4 Transfer Packet Condition
Displays number of packets sent and received
for:
Wired WAN
Wired LAN
Wireless LAN
Click
Refresh to start new transfer packet
log.
4.3.5 PING Test
Performs a PING test from the AirStation to
a LAN or WAN address.
Enter the target IP address and click
OK (e.g.
192.168.11.2 - OR- www.buffalotech.com)
Fig ure 4.3.2
Name and
Password
Fig ure 4.3.3
Time Setup
Fig ure 4.3.4
Transfer Packet
Information
Fig ure 4.3.5
Ping Test