Behringer iNuke NU6000DSP User Manual

Page 16

iNUKE NU6000DSP/NU3000DSP/NU1000DSP User Manual

Programming BEHRINGER Amp Remote Software for

bi-amping
1. Select the Configuration tab.
2. Choose the Bi-Amp 2 signal path in the Configuration tab. A confirmation

window will pop up.

3. Click “Yes” on the Amp Mode confirmation window.
4. Select the Filter/Crossover tab.
5. Select the X-Over button below the Frequency Curve display. A confirmation

window will up up asking if you wish to set a Default Crossover.

6. Click “Yes” in the confirmation window. The X-Over button will illuminate,

and default crossover settings will appear in the Frequency Curve and

Control View.

7. Choose a filter type from either the Low Pass 2 or High Pass 3 Type pulldown

menus (the software defaults to a Butterworth filter). Any changes to the

Low Pass 2 or High Pass 3 settings will also automatically appear in both

filter’s Control View settings.

8. Choose a filter slope setting from the Slope pulldown menu under either

Low Pass 2 or High Pass 3 (the software defaults to a Butterworth filter).

Again, matching parameters will automatically appear in both filter’s Control

View settings.

9. Set the crossover frequency by using any of these three methods:
a) Rotate the Low Pass 2 or High Pass 3 virtual Freq knobs in the Control View.

The crossover frequency displayed in the Freq box below the virtual knob

will change simultaneously for both filters.

b) Select the text box below either Freq virtual knob, and type your desired

frequency directly into the text box.

c) Go to the Frequency Curve display, click on the frequency line marked “2,”

and drag the frequency line to the desired area of the Frequency Curve.

Parameter settings and virtual knobs in the Control View will automatically

move and change as you drag the crossover frequency through the

Frequency Curve window.

10. If necessary, adjust the Gain settings for Channel A and Channel B by rotating

the respective Gain virtual knobs.

NU3000DSP

4-pole

XENYX 1202FX

B1800X PRO Front

EUROLIVE

B1520 PRO

4-pole

2-pole

B1800X PRO Front

EUROLIVE

B1520 PRO

XLR balanced

B1800X PRO Rear