Braun NL955 - Manual (Page 49)

Apply Light Oil - See Lubrication Diagram
Apply Light Oil - See Lubrication Diagram
Apply Light Oil - See Lubrication Diagram
Apply Light Oil - See Lubrication Diagram
Apply Light Oil - See Lubrication Diagram
Apply Light Oil - See Lubrication Diagram
Apply Light Oil - See Lubrication Diagram
Apply Light Oil - See Lubrication Diagram
Correct, replace defective parts and/or relubri-
cate.
Resecure, replace or correct as needed. See
Platform Angle Instructions and Platform Floor
Level Adjustment Instructions.
Maintenance and Lubrication Schedule
Perform all procedures listed in previous section also
Platform pivot pin bearings (2)
Platform fold axles (2)
Inboard locator lever bearings (2)
Inboard locator lever slot (2)
Rotating pivot slide arm pivot pins (2)
Parallel arm pivot bearings (16)
Switch arm pivot pin bearings (2)
Hydraulic cylinder bushings (8)
Inspect Lift-Tite ™ latch rollers for wear or damage,
positive securement and proper operation (2)
Inspect inboard locator for:
• Wear or damage
• Proper operation. Inboard locator should just rest
on top surface of the base plate.
1500
Cycles
continued
Page 47