Braun NL955 - Manual (Page 22)

Page 20
Operation Notes and Details
Lift Features (continued):
Inboard Locator
and Bridge Plate
Fully-Deployed
(vertical)
Inboard
Locator
The inboard locator/bridge
plate must overlap the base
plate a minimum 1/2".
Fully-Unfolded
(horizontal)
Inboard Locator
(bridging position)
Inboard Locator and Bridge
Plate: NL955 Series lift models
are equipped with an automatic
inboard locator that also serves
as the bridge plate (inboard
locator photos below).
When the UNFOLD switch is
pressed and the platform unfolds
from stow position to floor level,
this mechanical locator/bridge
plate is automatically deployed to
the bridging (horizontal) position
to provide a bridge plate between
the platform and the lift base plate
(vehicle floor). The inboard edge of the bridge plate rests on the
threshold warning plate (base
plate).
The locator/bridge plate auto-
matically folds (rotates) to the
vertical (roll stop) position when
the platform lowers to the ground
(DOWN switch is pressed). As