Buffalo Technology Buffalo Network USB Print Server LPV3-U2 - Manual (Page 21)

21
Rendezvous is enabled by default so if you are using this service in
your network, the server will be discovered.
If used, enter AppleTalk info, otherwise leave in default condition.
After entering your settings, press the ‘Set’ button.
For further information please click on the ‘?’ icon next to the area in
question.
Restore the TCP/IP settings. Open your ‘System Preferences’ and
select ‘Network’. Set ‘Show’ to ‘Buit-in Ethernet’. Restore the
settings that were recorded previously. Use the ‘Using DHCP’ option
from the pull down menu if the IP address is to be automatically
assigned. Otherwise, enter the proper static IP address information.
Press the ‘Apply Now’ button when configuration is complete.