Buffalo Technology Buffalo Network USB Print Server LPV3-U2 - Manual (Page 14)

14
The ‘Browse’ dialog window will appear. Browse for the appropriate
printer, select it, and press the ‘OK’ button.
NOTE: If an error is displayed while browsing for the printer, then there
is a network problem, or a problem with the ‘PortName’ set on
Page 5. To remedy the problem, reset the Print Server to factory
defaults by following the instructions on Page 8. Then restart the
configuration from Page 4. If you still have problems, contact our 24/7
customer support at 1-(866) 752-6210.
The ‘Driver Selection’ window will appear. Select the correct driver
from the supplied list, or press the ‘Have Disk’ button to select a driver
supplied by the printer manufacturer. Once the proper driver has been
selected, press the ‘Next’ button.