Bosch NIT8053UC - Manual (Page 19)

19
ā
Service
Troubleshooting
Problems often have a simple explanation. Before calling customer service, please
check the following:
Check to see if there is a problem with the circuit breaker for the appliance. See if
there is a power outage.
The touch key panel is heavily soiled, food has boiled over, or there is something
lying on the touch key. Wipe the touch key thoroughly or remove the object. Press
the corresponding touch key. The flashing should stop.
The main switch has been activated continuously for more than 5 seconds. Wipe up
any soil on the touch keys. Remove any objects that are resting on the touch keys.
Reset the cooktop.
The power key was touched unintentionally. Press power key again. Reset the
cooktop.
Check whether the saucepan is electromagnetic (attracts a magnet). Check
whether the diameter of the saucepan is large enough.
Allow the saucepan to cool down in the event that it has become too hot when
used.
If the display still does not light up when you switch the element off and on again,
disconnect the appliance at the circuit breaker. Wait 20 seconds and then
reconnect it.
The powerboost function operates the element with the most possible power.
During long cooking times, it is possible that the function will switch the element off
to protect the cooktop from overheating. You can continue to use the cooktop if the
display is not flashing.
Repairs should only be done by a trained service technician.
WARNING If your appliance is repaired improperly, you could be at considerable
risk.
The cooktop is not working
E is flashing on the element
display
E flashes on all the element
displays and a signal sounds
The cooktop turns off by itself
The display flashes (there is no
power) when you place a saucepan
on an induction element
The powerboost function display
flashes and then switches off
Repairs
d