Barco RLM G5I PERFORMER R9010320 - Manual (Page 69)

8. Image Menu
Image 8-11
8.3 Aspect ratio
Aspect ratio is greyed out when the Full Screen Representation function in Display Setup is switched ON or
when the Show Native Resolution function in Image is switched ON.
What can be done ?
The aspect ratio setting forces the projector to project an image using a defined aspect ratio
Aspect ratio Description
Auto Calculates an aspect ratio based on the information stored in the images files.
4:3 Standard television format
16:9 Wide screen television format / anamorphic format
5:4 Workstation format
2.35 Cine Scope 35 mm
2.88
1.78 Wide screen television format / anamorphic format
Custom Custom aspect ratio can be set up
Selecting Auto in case of a Video source may shrink the image horizontally or vertically
Some examples:
Type of input signal is indicated above each image row. The image row shows how the image will be projected in the different aspect
ratio settings. The arrow indicates the correct setting for the mentioned source.
R5976815 RLM G5I PERFORMER 02/06/2006 67