Behringer SL2442FX-PRO - Manual (Page 14)

14
EURODESK SL3242FX - PRO
/SL2442FX - PRO
5. INSTALLATION
5. INSTALLATION
Blown fuses must be replaced by fuses of the same type and
rating.
The mains connection is made using the enclosed power cord
and a standard IEC receptacle. It meets all of the international
safety certification requirements.
+
Please make sure that all units have a proper
ground connection. For your own safety, never
remove or disable the ground conductor from the
unit or of the AC power cord.
5.1 Audio connections
The inputs and outputs of the BEHRINGER EURODESK are
designed as unbalanced 1/4" TS connectors—except for the
balanced line inputs of the mono and stereo channels and the
main out connectors. Of course, all inputs and outputs work
with both balanced and unbalanced connectors. The tape ins
and outs are stereo RCA connectors.
+
Please ensure that only qualified personnel install
and operate the EURODESK. During installation and
operation, the user must have sufficient electrical
contact to earth. Electrostatic charges might affect
the operation of the unit.
Fig. 5.1: 1/4" TS connector
Fig. 5.2: 1/4" TRS connector
Fig. 5.3: RCA cable
Fig. 5.4: XLR connectors
Fig. 5.5: 1/4" TS footswitch connector
Fig. 5.6: Insert send and return 1/4" TRS connector
Fig. 5.7: 1/4" TRS connector for headphones