Philips Televisor LCD profesional - Manual (Page 9)

9
The second option in the settings page is ‘Analogue Channel’.
If you select ‘Off’, the set will not search for analogue channels. If you select ‘On’, the analogue channels will be part
of the search.
The last option is ‘Reset’. This will reset the search settings to default. After you have checked or changed settings,
you can select ‘Done’ and select ‘Start’ to start the channel search.
During the channel search you can see the progress bar and how many channels are found at that time.
When the search is done, you should see ‘Channel search complete’ and a summary of the channels found. In this
case:
Digital channels found: 53
Analogue channels found: 0
Press the ‘OK’ button on remote control to finish the search. When ‘Done’ please confirm with ‘OK’.