Audiovox RVMPKG2 - Manual (Page 7)

7
(2) Tear off the adhesive tape on the back of the hands free seat. Press
tightly to seat on to the selected surface for 30 seconds till the two
surfaces are tightly glued.
NOTE:
Make sure the two surfaces are glued tightly!
(3) Clean a place on the back of the cell phone, keeping it dry. Remove
the adhesive tape of the rounded metal sheet and stick it to the
selected place on the back of the cell phone.
NOTE:
Do not attempt to move the phone within 24 hours after gluing.
CAUTION:
The rounded metal sheet can only be glued once, so be sure it is
at the right place!
Figure 4