Blaupunkt DX-V - Manual (Page 67)

Anhang Allgemeines Kurzanlei- Touren Zieleingabe Zielspeicher Einstellun-
67
Calibration settings
1. Mark on the top line of the “Settings” menu. Press OK .
The sub-menu for calibration will appear. ✔
Calibration after changing the tyres
When the car tyres are changed, from summer to winter tyres for example, it might be
necessary to calibrate the TravelPilot DX-V again.
1. Select “Tyre change”. Press OK .
A warning note will appear. ✔
2. If you want to calibrate the system, select “Continue” and press OK .
As soon as you begin driving, the TravelPilot DX-V will begin to update the
calibration information stored.
This process is displayed in a status window.
✔
Installing the system again
If the TravelPilot DX-V is installed in a different vehicle, the entire calibration process
must be performed again.
1. Select “New installation”. Press OK .
A warning note will appear. ✔
2. If you want to recalibrate the system, select “Continue” and press the
OK button.
All the calibration data are deleted. ✔
3. As soon as you begin driving, the TravelPilot will begin to calibrate the sys-
tem.
This process is displayed in a status window.
✔
System settings