Blaupunkt SAN FRANCISCO RDM 127 - Manual (Page 30)

60
CD/CDC UPD
Use this function during CD
and CDC operation to delete
CD names, in order to free
memory space for new
discs. (See “Deleting a CD
name with DSC-UPDATE”).
AUX This menu item is not avail-
able if you have connected
a CD changer (A 05 or
F 05).
The setting made at the fac-
tory is AUX OFF.
If you have connected an
external piece of equipment
via AUX, this function must
be set to AUX ON.
VOL FIX Use this function to select
the volume at which the ra-
dio is set when it is switched
on. Adjust the desired vol-
ume level with << >>. When
adjusted to “VOL 0”, the
system will come on with the
volume selected before
switching the radio off.
To quit the DSC programming mode
and store the adjustment:
•
Press DSC.
Overview of the DSC factory
settings
CD/CDC NAME -
LOUDNESS
3
TA VOL 35
SPEECH 0
BEEP 4
ANGLE 0
BRIGHT 16
COLOUR green
LED ON
LEARN KC -
READ KC -
PTY LANG ENGLISH
SCANTIME 10 sec.
S - DX 1
S - LO 1
CD/CDC UPD -
AUX OFF
VOL FIX 0
Specifications
Amplifier
Output power: 4 x 23 W RMS power
acc. to DIN 45324 at
14.4 V
4 x 35 W max. power
Tuner
Wavebands:
FM
: 87.5 – 108 MHz
MW : 531 – 1602 kHz
LW : 153 – 279 kHz
FM sensitivity: 0.9 µ V at 26 dB signal-
to-noise ratio
FM frequency response:
30 - 16 000 Hz
CD player
Frequency response:
20 - 20 000 Hz
Subject to modifications!
San Francisco gb® 29.05.2002, 12:16 Uhr 60