Behringer ROTARY BCR2000 - Manual (Page 7)

7
B-CONTROL FADER BCF2000/B-CONTROL ROTARY BCR2000
CONTROLLER connector (BCF2000 only). Here, you can
connect a footswitch that can be used for controlling
assignable MIDI data.
The POWER switch turns your B-CONTROL on. The
POWER switch should always be in its “Off” position when
connecting the unit to the mains.
+
Please keep in mind: The POWER switch does not fully
disconnect your B-CONTROL from the mains. Always
unplug the power cord from the mains if you don’t intend
to use your B-CONTROL for longer periods of time.
Fig. 3.1: The control surface of the B-CONTROLs
Fig.3.2: The back of the BCF2000 (control elements to coincide with the BCR2000)
3. CONTROL ELEMENTS AND CONNECTIONS
The connection to the mains is established using a standard
connection socket. A matching cable is included in the
shipment.
SERIAL NUMBER. Please take the time to fill out and return
the warranty card within 14 days after the date of purchase
to benefit from our extended warranty. The serial number is
located on the top side of your REV2496. You can also
register online at www.behringer.com.