Bloomfield 9421 (SS2-HE) User Manual
Page 2
NOTE: For your protection, please note that equipment in
this shipment was carefully inspected and packaged by
skilled personnel before leaving the factory. Upon accep-
tance of this shipment, the transportation company assumes
full responsibility for its safe delivery.
IF SHIPMENT ARRIVES DAMAGED:
1.
VISIBLE LOSS OR DAMAGE: Be certain that any
visible loss or damage is noted on the freight bill
or express receipt, and that the note of loss or damage
is signed by the delivery person.
2.
FILE CLAIM FOR DAMAGE IMMEDIATELY:
Regardless of the extent of the damage.
3.
CONCEALED LOSS OR DAMAGE: if damage is
unnoticed until the merchandise is unpacked, notify the
transportation company or carrier immediately, and file
“CONCEALED DAMAGE” claim with them. This
must be done within fifteen (15) days from the date the
delivery was made to you. Be sure to retain the
container for inspection.
Bloomfield Industries cannot assume liability for damage or
loss incurred in transit. We will, however, at your request,
supply you with the necessary documents to support your
claim.
WARRANTY STATEMENT
SERVICE POLICY AND PROCEDURE GUIDE
ADDITIONAL WARRANTY EXCLUSIONS
SHIPPING DAMAGE CLAIMS PROCEDURE
All electrical equipment manufactured by BLOOMFIELD
INDUSTRIES is warranted against defects in material and
workmanship for a period of one year from original purchase
or eighteen months from the date of shipment from our
factory, whichever comes first, and is for the benefit of the
original purchaser, except that; airpots carry a 30 day
warranty only; dispensers i.e. tea and coffee carry a 90 day
warranty; and, decanters are excluded.
THIS WARRANTY IS THE COMPLETE AND ONLY
WARRANTY, EXPRESSED OR IMPLIED IN LAW OR IN
FACT, INCLUDING, BUT NOT LIMITED TO, WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR ANY PARTICU-
LAR PURPOSE, AND/OR INDIRECT OR CONSEQUENTIAL
DAMAGES IN CONNECTION WITH BLOOMFIELD
PRODUCTS.
This warranty is void if it is determined upon inspection by an
Authorized Service Agency that the equipment has been
modified, misused, misapplied, improperly installed, or
damaged in transit or by fire, flood or act of God.
It also does not apply if the serial nameplate has been
removed or service is performed by unauthorized personnel.
The prices charged by Bloomfield Industries for its products
are based upon the limitations in this warranty. Seller’s obli-
gation under this warranty is limited to repair of defects with-
out charge by a Bloomfield Industries Authorized Service
Agency or one of its sub-agencies. This service will be
provided on customer’s premises for non-portable models.
Portable models (a device with a cord and plug) must be
taken or shipped to the closest Authorized Service Agency,
transportation charges prepaid for service.
In addition to restrictions contained in this warranty, specific
limitations are detailed in the ADDITIONAL WARRANTY
EXCLUSIONS section. Bloomfield Industries Authorized
Service Agencies are located in principal cities.
This warranty is valid in the United States and void elsewhere.
Please consult your classified telephone directory, your food
service equipment dealer, or, for information and other details
concerning warranty write to:
Service Parts Department
Bloomfield Industries
P. O. Box 280
Verdi, Nevada 89439
(775) 345-0444
fax (775) 345-0569
1. Resetting of safety thermostats, circuit breakers,
overload protectors, or fuse replacements unless warranted
conditions are the cause.
2.
All problems due to operation at voltages other than
specified on equipment nameplates—conversion to correct
voltage must be the customer’s responsibility.
3. All problems due to electrical connections not made in
accordance with electrical code requirements and wiring
diagrams supplied with the equipment.
4. Replacement of items subject to normal wear, to include
such items as knobs and light bulbs. Normal maintenance
functions including adjustment of thermostats, microswitches,
and replacement of fuses and indicating lights are not covered
under warranty.
5. All problems due to inadequate water supply, such as
fluctuating, or high or low water pressure.
6. All problems due to mineral/calcium deposits, or contamination
from chlorides/chlorines. De-liming is considered a preventative
maintenance function and is not covered by warranty.
7. Full use, care and maintenance instructions are supplied
with each machine. Those miscellaneous adjustments noted
are customer responsibility. Proper attention will prolong the
life of the machine.
8. Travel mileage is limited to sixty (60) miles from an
authorized Service Agency or one of its sub-agencies.
9. All labor shall be performed during normal working hours.
Overtime premium shall be charged to the customer.
10. All genuine Bloomfield replacement parts are warranted for
ninety (90) days from date of purchase on non-warranted equipment.
Any use of non-genuine Bloomfield parts completely
voids any warranty.
11. Installation, labor and job check-out are not considered
warranty.
12. Charges incurred by delays, waiting time or operating
restrictions that hinder the service technicians ability to perform
services are not covered by warranty. This includes institutional
and correctional facilities.
xi