BT Diverse 5250 - Manual (Page 18)

BT Diverse 5250 ~ 5th Edition ~ 20th May ’03 ~ 5187
16
Note
If you need to replace the handset in
the base station during a call, for
example, because the battery is flat,
hold down the
HANDSFREE button.
To switch to handsfree during
a call
During a call you can switch to
handsfree mode:
Press the HANDSFREE button.
The call is transferred to the
loudspeaker.
Press the GREEN PHONE
button to switch back to using
the handset.
To answer a call in handsfree
When the phone rings:
Press the HANDSFREE button.
The call is transferred to the
loudspeaker.
USING
To store an entry in the
directory
Press the DIRECTORY button.
Press the MENU options button.
Display shows New Entry .
Press the OK options button.
Enter the telephone number.
Press the OK options button to
enter the name.
Enter the name.
Entering names:
Enter the name using the letters
on the keypad. For example, to
enter the name
TOM :
Press the 8 button, T appears
on the display.
Press the 6 button three times
until the display shows O .
Then press the 6 button to
display m .
For the full character map,
see page 17.
Press the MENU options
button. Display shows Save
Entry .
Press the OK options button
to confirm.
Press the RED PHONE button
until you reach the idle display.
OK
OK
MENU
Using the directory
You can store up to 50 names and
numbers in the telephone directory.
You can enter up to 32 digits and up to
16 characters.
OK
MENU
8
TUV
6
MNO
6
MNO
BT Diverse Helpline – 08457 908 070