Technical specifications – Bushnell 18-0833 User Manual
Page 3
QUICK GUIDE: BUSHNELL INSTANT REPLAY 18-0833
6
Take A Photo or
Shoot A Video
Clip
For still photos, set the Still/Video switch to the left position. Look through the binoculars and
adjust the center focus until your subject is sharp. For best results, check the focus on the preview
LCD, and readjust if necessary. Hold the Replay steady with both hands and press the Shutter but-
ton to take the photo. To shoot a video, move the Still/Video switch to the right position. Focus as
described above, then press the Shutter button to start the video. After 30 seconds, the video record-
ing will begin to loop (it will re-record over the previous video, replacing it with the new events).
You may stop at any time by pressing the Shutter button again. This will preserve the last, most
recent 30 seconds of action. When you start recording in video mode again after stopping, a new 30
second loop recording begins (previously recorded loops are preserved and stored separately).
7
Review and
Delete Photos
Press the Display button to review stored photos or videos (which you see depends on the position
of the still/video switch). To move to the next photo or video, press the Up or Down arrow keys on
the 4-way pad. To play a video, press the Right arrow key. To delete a photo or video, press “OK/
Menu”, then select “Delete & lock” by pressing “OK” again. Press the Right button once or twice
to select either “Delete one” (currently displayed photo or video only) or “Delete all” (deletes all
photos or all videos, depending on the still/video switch position). Press OK to confirm your selec-
tion, then select “Yes” (press up button) and press “OK” to delete the file(s). Note that you may use
the Up/Down arrow buttons to step through your stored photos, and delete only selected photos by
using “Delete one”. When finished, select “Exit” in the Delete & lock menu (icon on the far left),
press OK, then press the Display button if you wish to return to a live preview.
8
Connect To A
Computer &
Transfer Photos
Before connecting the camera, install the driver from the CD-ROM if you use Windows 98/98SE,
and install PhotoSuite if you do not already have photo editing software. Connect the supplied USB
cable from the camera’s USB socket (inside the connector door on the left side) to a USB port on
your PC. If you have Windows XP, just follow the onscreen directions/options that automatically
appear. If you have Win 98 or 2000, open “My Computer” on your PC. The camera is identified as
a “Removable Disk” -your photos are in the folders inside, simply drag them or copy/paste into any
folder on your hard drive. Refer to the “Transferring Photos” section of this manual.
Technical Specifications
Magnification
8x
Lower Resolution Options
1600x1200, 1280x960, 800x600,640x480
Objective Diameter
32mm
File Compression Ratio (Quality)
1:4 (FQ), 1:10 (NQ), 1:16 (EQ)
Exit Pupil
4.0
Internal Memory
32MB Flash Memory
Field of View
314 ft @ 1000 yds
Memory Expansion
Compact Flash Card (Type 1), up to 1 GB capacity
Eye Relief
15mm
File Format (Still/Video)
JPEG / AVI
Lens Coating
Fully Multi-coated
Video Resolution/Frame Rate
320x240 / 15 fps , 30 second loop recording
Prism Type
Roof, BaK-4
LCD
1.8” TFT, 130,000 pixels
Focusing Range
approx 11’ ~ inf.
Video Out
NTSC/PAL selectable, composite video, 1/8” jack
Weight
25 oz / 698 g
Exposure Value Range
+/- 2 EV in 0.3 EV steps
Sensor
1/2.7” CCD
ISO Options
Auto, 100, 200, 400
Effective Pixels
3.2 Megapixels
White Balance Options
Auto, Daylight, Cloudy, Fluorescent, Incandescent
Image Ratio
4:3
Preset Scenes
Program, Sports, Landscape, Portrait, Night
Shutter
Mechanical /
Electronic
Menu Languages
English, Spanish, French, German, Italian, Portuguese
Focus
Manual
Auto Power Off (after inactivity)
LCD Display: 1 Min. / All Power Off: 5 Min.
Max. Resolution
2048x1536
DC Power In
3.3 V / 2A , 20~60 Hz/100~240 V
4
5
18-0833 6LIM.indd 4-5
1/28/05 2:47:35 PM