Whirlpool WFL98HEBU - Manual (Page 4)

4
CONTROL PANEL AND FEATURES
POWER
Press to turn the washer on and off. Press to stop/cancel
a cycle at any time.
NOTE: When the washer is turned on for the first time after
being plugged in or after a power outage, please allow a
minute or so for the washer display to start up.
START/PAUSE
Press and hold to start a cycle, or press once while a cycle
is in process to pause it.
PRECISION DISPENSE
This button is used to adjust the dispenser settings,
including adjustments for detergent concentration and
water hardness level.
IMPORTANT: When using the dispenser cartridge with
concentrated liquid detergent, be sure to change the
detergent concentration settings in the control if the detergent
used is different than factory preset of 2x concentration.
COLOR LCD DISPLAY SCREEN
This screen will display current options and settings, cycle
information, and estimated time remaining. You can also
use the navigation buttons below and on either side of the
screen to access helpful laundry and troubleshooting tips,
as well as other information.
6 9
1
2
3
5
8 7
3 4 2 1
4
5
C
B
A Precision Dispense Ultra
liquid HE detergent cartridge
B Powdered HE detergent compartment
C Liquid fabric softener
D Chlorine bleach
10 D
A
SYSTEM SETTINGS
The System Settings button allows you to adjust the LCD
display settings, including brightness and other preferences.
Under System Settings, you can access the following
functions:
Remote Start (model WFL98 only)
Allows you to start your washer remotely using the
Smartappliances app.
Control Lock
Allows you to disable all controls except the power button
to avoid unauthorized use or changes to running cycles.
End of Cycle
Adjusts the volume of the End of Cycle signal, or turns
it off.
Button Sound
Adjusts the volume of the button sounds, or turns
them off.
Brightness
Adjusts the brightness of the LCD screen.
Language
Displays information in English, French, or Spanish.
Themes
Select between two different display color and
background themes.
or