Whirlpool WFL98HEBU - Manual (Page 12)

12
MY CYCLE AND SPECIALTY CYCLES
MY CYCLE
You may store up to 7 frequently used custom cycles in My
Cycle for quick access.
To save a custom cycle:
1. Select My Cycle with the Wash Cycle knob.
2. Follow the on-screen prompts.
If you try to add another custom cycle and all 7 custom storage
spaces are filled, you will need to delete a saved custom cycle
before saving the new one.
To retrieve a custom cycle using My Cycle:
1. Select My Cycle with the Wash Cycle knob.
2. Use the t and u arrow keys to scroll through the saved
custom cycles until the desired cycle is displayed.
3. Press the selector button under the desired cycle.
SPECIALTY CYCLES
Specialty cycles are designed for a specific purpose, such as
washing pillows or comforters. To select a specialty cycle, turn
the Wash Cycle knob to Specialty, then select the desired cycle
from the display screen using the selection buttons.
Specialty Cycles include:
Blankets/Comforters – Cotton Blanket
Blankets/Comforters – Synthetic Blanket
Blankets/Comforters – Comforter
Pillows – Feather
Pillows – Fiberfill
Pillows – Decorative
Sheets/Linens – Cotton
Sheets/Linens – Synthetics
Wool Sweaters
Kidswear
Sportswear – Cotton
Sportswear – Performance
Intimates
Business Wear
Specialty Cycles
Blankets/
Comforter Pillows Sheets/Linens Wool Sweaters
13.
Remove garments promptly
after cycle is finished
Promptly remove garments after cycle has
completed to avoid odor and rusting of
metal objects on garments. When unloading
garments, pull back the door seal and check
for small items between the tub and the
washer drum.
If you will be unable to remove the
load promptly, use the FanFresh ® option.
If the FanFresh ® option is selected, the washer
will automatically activate the fan and tumble
the load periodically for up to 16 hours.
NOTE:
n After any wash cycle is completed,
the door must be opened and then
closed before a new cycle can begin.
n
A small amount of water may remain in the dispensers
after the wash cycle is complete. This is normal.
n This washer has a tight seal to avoid water leaks. To avoid
odors, leave the door open to allow the washer to dry
between uses.
12.
Press and hold START/PAUSE
to begin wash cycle
Press and hold the START/PAUSE button to start the wash
cycle. To pause a cycle in progress, press the START/PAUSE
button once, then press and hold again to continue the cycle.
To cancel a cycle, press the POWER button.
Once you press and hold START/PAUSE, you will hear the
door lock, unlock, and lock again. The washer door will remain
locked during the wash cycle.
Unlocking the door to add garments:
If you need to open the door to add 1 or 2 missed garments,
you may do so while “Door Locked - To unlock and add a
garment, press START/PAUSE button” is displayed.
Press START/PAUSE once; the door will unlock
once the washer movement has stopped.
This may take several minutes. Then close
door and press START/PAUSE again to restart
the cycle.