beautypg.com

Interior fittings, Taking out the glass shelf “easylift, Taking out the door shelf “easylift – Neff K8315X0 User Manual

Page 14: Taking out the butter and cheese compartment, Removing the container, Taking out the humidity filter, Remove telescopic rails, Installing telescopic rails, Odours, En 14

background image

en

14

After cleaning, the stopper must be re-

inserted into the drainage hole

of the refrigerator compartment for

functional reasons.

Interior fittings

All variable parts of the appliance

can be taken out for cleaning.
Taking out the glass shelf “EasyLift”

Fig. $
Move glass shelf all the way upwards

and take out.
Taking out the door shelf “EasyLift”

Fig. &
Move door shelf all the way upwards and

take out.
Taking out the butter and cheese

compartment

Fig. (
To clean the compartment, lift it at

the bottom and take out.
Removing the container

Fig. )

Tilt container forwards and take out.
To insert the container, place the front

of the container on the telescopic rails

and push into the appliance.

The container is engaged by pushing it

into the appliance.
Taking out the humidity filter

Fig. !/19

The humidity filter over the humidity

container can be taken out for cleaning.

To do this, first take out the humidity

container and pull out the humidity filter.

Lift off the filter cover, Fig. +, and take

out the filter. Clean in lukewarm water,

leave to dry and re-assemble.

Remove telescopic rails

Fig. ,
1. Pull out the telescopic rail.
2. Push lock in the direction of the arrow.
3. Detach telescopic rail from the rear

pin.

4. Push telescopic rail together, push

backwards above the rear pin

and disengage.

Installing telescopic rails
1. Place the extended telescopic

rail on the front pin.

2. Pull the telescopic rail forwards

slightly until it engages.

3. Place telescopic rail on the rear pin.
4. Push lock backwards.

Odours

If you experience unpleasant odours:
1. Switch off the appliance with the On/

Off button. Fig. !/6.

2. Take all food out of the appliance.
3. Clean interior (see chapter “Cleaning

the appliance”).

4. Clean all packages.
5. Seal strong smelling food in order

to avoid odours from forming.

6. Switch the appliance on again.
7. Store food in the appliance.
8. Check whether the formation

of odours is still occuring after

24 hours.

9. Change odour filter, Fig. -.

The odour filter is situated behind

the upper “cool-fresh” container.

Replacement filters are available from

your customer service.