Blaupunkt SAN FRANCISCO CD70 - Manual (Page 11)

11
ENGLISH
FRANÇAIS
ESP
AÑOL
PORTUGUÊS
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
Volume adjustment
The system volume can be adjusted in steps
from 0 (off) to 50 (maximum).
➮
To raise the system volume, turn the
volume control
3
to the right.
➮
To lower the system volume, turn the
volume control
3
to the left.
Setting the switch-on volume
It is possible to adjust the volume that will play
when you switch the radio on.
➮
Press the MENU button
8
.
➮
Press the soft key
4
with the display
allocation “VAR”.
➮
Press the soft key
4
with the display
allocation “VOL”.
➮
Set the volume using volume control
3
or the or buttons
7
.
If you wish to set the volume active before
the unit was last switched off as the switch-
on volume,
➮
press the button
7
.
“LAST VOL” appears on the display.
Risk of serious injury! If the switch-on
volume is set at the maximum, the volume
can be very high when you switch on your
car radio.
If the volume was set on maximum
before the unit was last switched off and
the switch-on volume is set at “LAST VOL”,
the volume can be very high when you
switch on your car radio.
In both cases, your hearing may suffer
serious damage!
➮
Press the OK button
5
to go back to
the previous menu level or the MENU
button
8
to leave the menu altogether.
The settings are now stored.
Mute setting
This feature enables you to lower the system
volume instantaneously (mute).
➮
Briefly press the button
2
.
“MUTE” appears on the display.
Deactivating the mute setting
➮
Briefly press the button
2
or
➮
turn the volume control
3
.
Mute during telephone
If your car radio is connected to a mobile tele-
phone, the volume will be muted as soon as
you “pick up” the telephone. In order for this
to work, the mobile telephone has to be con-
nected to the car radio as described in the
instructions.
Setting the volume for the
warning tone (beep)
If you hold down a button for longer than two
seconds when using certain functions, e.g.
storing a station on a station button, a warn-
ing tone (beep) sounds. The volume of this
beep is adjustable.
➮
Press the MENU button
8
.
➮
Press the soft key
4
with the display
allocation “VAR”.
➮
Press the soft key
4
with the display
allocation “BEEP”.
➮
Adjust the volume using the and
buttons.
If you wish to deactivate the beep,
➮
press the button
7
.
“BEEP OFF” appears on the display.
➮
Press the OK button
5
to return to the
previous menu level or the MENU but-
ton
8
to leave the menu altogether.
The settings are now stored.
VOLUME