beautypg.com

First use, Using your car radio for the first time, Changing settings – Blaupunkt SAN FRANCISCO CD70 User Manual

Page 10: Exiting the install menu

background image

10

First use

If the unit is being connected for the first time
or if the power supply to the unit has been
interrupted, the Install menu will appear. The
following settings are made in the Install
menu:

Selection of an external audio source
instead of a CD changer

Time setting

Tuner configuration for US or European
operation

Reset to factory defaults

Internal amplifier on/off.

You can reopen the Install menu at any time:

Hold down the MENU button

8

until

the Install menu appears.

Changing settings

Selecting an external audio source

Press the soft key

4

with the display

allocation “AUX” .

If the display reads “AUX”, then the input is
already on.

Press the or button

7

to toggle

“AUX” on or off.

Press the OK button

5

.

Note:
If the AUX input is on, it can be selected with
the CDC button

=

.

Setting the clock

Press the soft key

4

with the display

allocation “CLK”.

Set the hour using the or button

7

.

Press the button

7

.

Set the minutes using the or button

7

.

Press the OK button

5

.

Setting the tuner

To ensure proper tuner function in

the US the tuner must be set to “US”.

Press the soft key

4

with the display

allocation “TUNE”.

Select “EUROPE” or “US” using the us-
ing the or button

7

.

Press the OK button

5

.

Switching the internal amplifier on/off

Press the soft key

4

with the display

allocation “AMP”.

Select “AMP ON” or “AMP OFF” using
the using the or button

7

.

Press the OK button

5

.

Note:
If you set the internal amplifier to “AMP OFF”,
there will be no playback via the loudspeak-
ers connected directly to the unit. In this case,
playback will be solely via an external ampli-
fier.

Reset (factory defaults)

Press the soft key

4

with the display

allocation “NORM”.

The display will read “NORMSET”.

If you really want to reset the device to the
factory presets,

press the OK button

5

.

Exiting the Install menu

To exit the install menu,

press the OK button

5

. The settings

are now stored.

USING YOUR CAR RADIO FOR THE FIRST TIME