Buffalo Technology WBMR-G54 - Manual (Page 46)

WBMR-G54 Wireless ADSL Router User Guide
Static IP Address
When the Router is configured to use Static IP Address assignment for the WAN connection, you must manually assign
a global IP Address, Subnet Mask and Gateway IP Address used for the WAN connection. Most users will also need to
configure DNS server IP settings in the DNS Configuration window (see below). Follow the instruction below to
configure the Router to use Static IP Address assignment for the WAN connection.
To configure a Static IP Address connection, perform the steps listed below. Some of the settings do not need to be
changed the first time the device is set up, but can be changed later if you choose. See the table below for a description
of all the settings available in this window.
36