Buffalo Technology WBMR-G54 User Manual

Page 40

WBMR-G54 Wireless ADSL Router User Guide

default setting for

Dynamic IP. Some users will be given a specific IP

address for the WAN interface. In this case you need to change this

setting to

Static IP. When Static IP is selected in the IP Control menu,

you need to type in the global IP address provided to you by your ISP.

The

IP Unnumbered option is used if you want to set up a non-TCP/IP

port protocol link through the WAN interface. An IP Unnumbered

interface does not have an IP address and therefore cannot be managed

via Telnet or any other TCP/IP application.

Static IP

If you have selected the

Static IP option in the IP Control menu, type in

the global IP address used for your WAN interface. Your ISP should

provide this IP address to you.

Connection Setting

Select the desired option: Always ON, Connection On Demand, or

Manual. Most users will want to choose the default connection setting,
Always ON.