Glen Dimplex Home Appliances Ltd BI 70 G - Manual (Page 20)

Programmer / Clock
18
The programmer buttons
minus
plus
The ‘function’ button in the centre is
used for setting the minute minder and
setting up the automatic cooking. See
below for details.
To set the time of day
When the power is turned on to the
appliance, the time of day starts from
0.00.
Press and release the
(minus) and
(plus) buttons simultaneously. Set the
time of day, eg 2.00 with the
and
buttons while the ‘dot’ beween the
hours and minutes is flashing.
To select an alarm tone
Press and hold the (minus) button to
listen to the first tone. Release the
button and press it again to listen to
the second tone, etc. Releasing the
button after the tone has sounded
will automatically select that tone.
Setting the minute minder
Press and release the function button.
The minute minder bell symbol will
appear and flash on the display. Use
the plus and minus buttons to set the
required alarm time. After setting,
the display will revert to show the
time of day and the bell symbol will
stop flashing. Pressing the function
button will display the minutes
remaining. If the time has counted
down to the last minue, the remaining
seconds are shown. The tone will
sound at the end of the time set. To
cancel the tone, press the function
button.