Belkin Wireless G Desktop Card F5D7000 - Manual (Page 14)

13 12 13 12
Knowing Your Router
6. Power Jack - GRAY
Connect the included 5V DC power supply to this jack.
7. Connections to Computers (LAN Ports) - BLUE
Connect your wired (non-wireless) computers to these ports.
These ports are RJ45, 10/100/1000 auto-negotiation, auto-
uplinking ports for standard UTP category 5 or 6 Ethernet cable.
The ports are labeled 1 through 4. These ports correspond to the
numbered LEDs on the front of the Router.
8. Connection to Modem (WAN Port) - GREEN
This port is for connection to your cable or DSL modem or uplink
to a server or network switch. This port is a 10/100/1000 auto-
negotiation, auto uplink port for standard UTP category 5 or 6
Ethernet cable. Use the cable that was provided with the modem
to connect the modem to this port. Use of a cable other than the
cable supplied with the cable modem may not work properly.
9. Reset Button
The Reset button is used in rare cases when the Router may
function improperly. Resetting the Router will restore the Router’s
normal operation while maintaining the programmed settings. You
can also restore the factory default settings by using the Reset
button. Use the restore option in instances where you may have
forgotten your custom password.
(6) (7) (8) (9)