Sharp GS-XP18FR - GU-XR18FR - Manual (Page 8)

1 Remove the remote control
cover.
2 Insert batteries in the compart-
ment, making sure the
± and
— polarities are correctly
aligned.
• The display indicates "AM
6:00" when batteries are prop-
erly installed.
3
Reinstall the cover.
USING THE REMOTE CONTROL
E-6
NOTES:
• The battery life is approximately one year in normal use.
• When you replace the batteries, always change both batteries, and make sure
they are the same type.
• If the remote control does not operate properly after replacing the batteries, take
out the batteries and reinstall them again after 30 seconds.
• If you will not be using the unit for a long time, remove the batteries from the
remote control.
Point the remote control towards the unit’s signal receiver window and
press the desired button. The unit generates a beep when it receives the
signal.
• Make sure there is no
curtain or other object
between the remote control
and the unit.
• The remote control can
send signals from up to 7
metres away.
LOADING BATTERIES
Use two size-AAA (R03) batteries.
HOW TO USE THE REMOTE CONTROL
Remote control
cover
+
-
+
-
Floor standing
Ceiling suspended
GS-XP07FR_Eng.p651 06.3.29, 8:14 AM 8