Sharp GS-XP12FGR - GU-X12FGR - Manual (Page 19)

ENGLISH
CLEANING THE UNIT AND THE REMOTE CONTROL
E-17
MAINTENANCE
Wipe them with a soft cloth.
• Do not directly splash or pour water on them. We can cause electrical shock or
equipment damage.
• Do not use hot water, thinner, abrasive powders or strong solvents.
The front grille can also be removed
Be sure to stop the operation and turn off the circuit breaker before performing any
maintenance.
1 OPEN THE FRONT GRILLE
Hold the two " " marked corners
on the front grille and pull it toward
yourself to open.
2 REMOVE THE AIR FILTERS
3 REMOVE THE FRONT GRILLE
Lift the front grille upward as shown
in picture.
4 CLEAN THE FRONT GRILLE
Wipe the front grille with a soft
cloth. If the front grille is dirty, wash
it with warm water and a mild deter-
gent. Dry the front grille completely
in the shade before reinstalling.
5 REPLACE THE FRONT
GRILLE
1 Fit the both lower shafts into
the lower shaft receivers.
2 Close the front grill and lift it to
hook both upper shafts into the
upper shaft receivers.
6 REINSTALL THE AIR FILTERS
7 CLOSE THE FRONT GRILLE
Press the two " " marked posi-
tions on the front grille to lock it in
place.
mark
air filter
front grille
upper shaft
upper shaft
receiver
lower shaft
lower shaft
receiver
1
2
3
5
6
7
2
1