Sharp GS-XP12FGR - GU-X12FGR - Manual (Page 15)

ENGLISH
E-13
1
PLASMACLUSTER OPERATION
1 During operation, press the PLASMACLUSTER
button.
• The remote control will display “ ”.
• The blue PLASMACLUSTER lamp on the unit will light
up.
TO CANCEL
Press the PLASMACLUSTER button again.
• The PLASMACLUSTER lamp on the unit will turn off.
NOTES:
• Use of the PLASMACLUSTER operation will be memorized, and it will be activated the next
time you turn on the air conditioner.
To perform the PLASMACLUSTER operation without accompanying heat, cool
or dry mode, press the PLASMACLUSTER button while the unit is not operat-
ing.
• The mode symbol of the remote control will go off and fan speed can not be set to AUTO.
• With multi-system models (GS-XPM9FGR/GS-XPM12FGR/GS-XPM18FGR), you may feel
warm air blown out from the unit when HEATING is performed with unit in other room. In
this case, indoor fan will not operate continuously.
The Plasmacluster ion generator inside the air conditioner will release positive and
negative Plasmacluster ions into the room.
Approximately the same numbers of positive and negative ions released into the air will
reduce some airborne mold.