Sharp GS-XP12FGR - GU-X12FGR - Manual (Page 17)

ENGLISH
1
Press the TIMER ON ( ) button.
2 The TIMER ON indicator will blink; press the TIME
ADVANCE or REVERSE buttons to set the de-
sired time. (The time can be set in 10-minute
increments.)
3 Point the remote control at the signal receiver
window on the unit and press the TIMER SET
(SET/C) button.
• The orange TIMER lamp ( ) on the unit will light.
• The unit will generate a beep when it receives the
signal.
4 Select the operation condition.
Example:
To stop operation at 11:00 p.m. and resume operation
(With the same mode and temperature settings) to turn
on the unit by 7:00 a.m.
1 Set the TIMER OFF to 11:00 p.m. during operation.
2
Set the TIMER ON to 7:00 a.m.
The arrow ( or ) between the TIMER ON indicator
and the TIMER OFF indicator shows which timer will
activate first.
E-15
NOTES:
• You cannot programme the ON-TIMER and OFF-TIMER to operate the unit at different tempera-
tures or other settings.
• Either timer can be programmed to activate prior the other.
You can use the ON and OFF timers in combination.
COMBINED USE OF ON AND OFF TIMERS
2
1
3
TIMER ON
SWING
FAN
MODE
SET/C
1h
NOTE:
• The unit will turn on prior to the set timer to allow the
room to reach the desired temperature by the pro-
grammed time. (Awaking function)