Sharp MX-M202D User Manual
Page 3
A n n e x B o f E C M A - 3 7 0 4
t h
e d i t i o n A m e n d e d , F e b r u a r y 2 0 1 0
P a g e 3 ( 6 )
Model number
*
MX-M202D
Issue date
*
2011-11-21
Logo
Product environmental attributes - Market requirements - Environmental conscious design
Requirement met
Item
*
=mandatory to fill in
.
Additional information regarding each item may be found under P14.
Yes
No
n.a.
P6
Treatment information
P6.1
*
Information for recyclers/treatment facilities is available (see legal reference).
P7
Design
Disassembly, recycling
P7.1
*
Parts that have to be treated separately are easily separable
P7.2
*
Plastic materials in covers/housing have no surface coating.
P7.3
*
Plastic parts >100g consist of one material or of easily separable materials.
P7.4
*
Plastic parts >25g have material codes according to ISO 11469 referring ISO 1043.
P7.5
Plastic parts are free from metal inlays or have inlays that can be removed with commonly available tools.
P7.6
*
Labels are easily separable. (This requirement does not apply to safety/regulatory labels).
Product lifetime
P7.7
*
Upgrading can be done e.g. with processor, memory, cards or drives
P7.8
*
Upgrading can be done using commonly available tools
P7.9.
Spare parts are available after end of production for:
7
years
P7.10
Service is available after end of production for:
7
years
Material and substance requirements
Product cover/housing material type:
P7.11
*
Material type:
PC-ABS
Material
type:
Material
type:
P7.12
Electrical cable insulation materials of power cables are PVC free.
P7.13
Electrical cable insulation materials of signal cables are PVC free
P7.14
All cover/housing plastic parts >25g are free from chlorine and bromine.
P7.15
All printed circuit boards (without components) >25g are halogen free. as defined in IEC61249-2-21.
(See
Note B2
)
P7.16
Flame retarded plastic parts >25g in covers / housings are marked according ISO 1043-4:
Marking:
>FR40<
P7.17 Alt. 1
Chemical specifications of flame retardants in printed circuit boards >25g (without components):
TBBPA (additive)
,
TBBPA
(reactive)
,
Other; chemical name:
, CAS #:
Alt. 2
Chemical specifications of flame retardants in printed circuit boards (without components) >25g according
ISO 1043-4:
P7.18 Alt.
1
Flame retarded plastic parts >25g contain the following flame retardant substances/preparations in
concentrations above 0.1%:
Comment: No legal limits exist, this is a market requirement.
1. Chemical name:
, CAS #:
2. Chemical name:
, CAS #:
3. Chemical name:
,
CAS #:
Alt. 2
Chemical specifications of flame retardants in plastic parts >25g according ISO 1043-4:
P7.19 Plastic parts >25g are free from flame retardant substances/ preparations above 0.1% classified as R45,
R40, R46, R48, R50, R51, R53, R60, R61 and any combination of these (See Note B3)
P7.20
Of total plastic parts’ weight >25g, recycled material content is
1.21
%.
P7.21
Of total plastic parts’ weight >25g, biobased material content is
0
%.
P7.22
Light sources are free from mercury
If mercury is used specify: Number of lamps:
1
and max. mercury content per lamp:
5
mg
P8
Batteries
P8.1
*
Battery chemical composition:
P8.2
Batteries meet the requirements of the following voluntary program/s:
Note B2: IEC61249-2--21 has maximum limits for chlorine and bromine but does not address fluorine, iodine and astatine
which are included in the group of halogens.
Note B3: 'Starting from January 2009, Risk phrases can be replaced by Hazard phrases according to the Globally Harmonized
System (GHS), mandatory by December 2010.