Sharp XE-A203 - Manual (Page 60)

58
ADVANCED FUNCTION PROGRAMMING
The register number and consecutive numbers are printed on every receipt or journal.
When your store has two or more registers, it is practical to set separate register numbers for identification. The
consecutive number is increased by one each time a receipt is issued or when a journal print occurs.
For consecutive number programming, enter a number (max. 6 digits) that is one less than the desired starting
number.
Register number
Consecutive number
Consecutive
number
s 2 @
1000 s A
Print Key operation example
@ s A A number (one to six digits) that is one
less than the desired starting number
To begin the count from 000001
s 2
Register number
s 1 @
123456 s A
Print Key operation example
s A
Register number (one to six digits)
To set the register number 0
@ s 1
Register Number and Consecutive Number Programming 1
A203_3 FOR THE MANAGER(SEEG) 06.5.6 8:08 PM Page 58