beautypg.com

2appliance details – Bosch 2400E NG User Manual

Page 4

background image

6 720 608 263

4

Appliance details

2

Appliance details

2.1

Features

Parts

• Touch Pad interface control

• High power pre-mix compact burner with low Nox

emissions

• Modulating Gas Valve with constant gas:air ratio

control

• Modulating water valve for improved comfort and

temperature control.

Safety

• Flame sensor (ionization) rod

• Overheat sensor

• Temperature limiter

• Fan speed monitoring.

High Quality Materials for Long Working Life

• Copper heat exchanger

• High efficiency Ceramat Burner

• Compact space saver: mounts on a wall with a

supplied bracket.

• Easily removable one-piece cover.

Features

• LCD Display

• On/Off and Temperature control switches

• Reset button

• Program Key (Selectable temperature default)

• Failure codes for easy diagnostic and repair.

Accessories

• Optional wireless remote control accessory to

operate with the appliance

• Vent termination kit.

2.2

2400 E Specifications (Technical
data)

Approved in US/Canada

Capacity

Maximum flow rate: 6.35 GPM (24 l/min) at a 45°F
(25°C) rise.

Maximum output

142,968 Btu/h (41.8 kW)

Maximum input

175,000 Btu/h (51.2 kW)

Efficiency in %

Recovery efficiency 86.5%

Min. Output

31,131 Btu/h (9.1 kW)

Temperature Control

Selection range: 100°F (38°C) - 140°F (60°C)

Default temperature: 122°F (50°C)

Stability: +/- 2°F (+/- 1°C)

Gas Requirement

Gas connection (inches) - ¾”

Inlet gas pressure under operation (with a high hot
water flow rate)*

• Propane: 11” - 14” water column

• Natural Gas: 5” - 14” water column.

* To measure Gas Pressure, see Measuring Gas
Pressure, chapter 2.12.

Venting

A condensate trap is integrated into the exhaust flue
gas collar of the heater, the supplied condensate drain
tube must be installed to it for proper removal of
condensate from the trap. See chapter 2.9 for Venting
on page 9.

Water

• Hot water connection (inches) - ¾”

• Cold water connection (inches) - ¾”

• Water valve material: Polymer (PPS) (Polypropylene

Sulfid)

• Minimum water flow: 0.8 gallon/minute (3 l/m)

• Minimum recommended water pressure: 30 PSI

(2.07 bar)

• Connections:

– Bottom of heater

i

BOSCH is constantly improving its
products, therefore specifications are
subject to change without prior notice.

This manual is related to the following products: