beautypg.com

Bosch 2400E NG User Manual

Page 23

background image

6 720 608 263

Operation instructions

23

3.3

Use of remote control accessory

Fig. 31 Remote control

The wireless remote control accessory and the
temperature selector buttons on the front of the water
heater operate identically. Contact your distributor or
BBTNA to order if the remote control accessory is
preferred. Modification of the water heaters interior
control unit (Fig. 29, component 12) is required when
programming the remote control with this heater.

3.4

Operation

B When a hot water tap is opened, main burner ignites

and LCD displays indication

.

Fig. 32

B LCD blinks until selected temperature is reached.

3.5

Reset button

If the LCD shows the error symbol

.

See the error code on LCD and consult
“Troubleshooting” section.

Fig. 33

After following instructions indicated in
“Troubleshooting” section

B press reset button in order to make the appliance

ready-to-work.

Fig. 34 Reset button

If the problem persists, contact your installer.

3.6

Program button

Program button can be used/programmed in the
appliance and in the remote control.

Programming “Program” function
Programming actions are similar for both controls
(appliance control pad and wireless remote control).

Fig. 35 “Program” key

B Press buttons

and

to select temperature to

be memorized.

B Hold “Program” button for 3 seconds to save

temperature.

When LCD stops blinking. Temperature is saved on
“Program”.

Using “Program” function
In order to select memorized temperature

B Press “Program” key.

LCD shows pre-memorized temperature, which is now
the hot water selected temperature.

3.7

Locked condition

This condition is only valid for appliances with more
then 1 controller (appliances with remote control).

Fig. 36 Locked condition

Whenever LCD shows

the temperature setting

cannot be adjusted because the appliance is in use by
a user which already selected a different temperature.
Appliance will be automatically unlocked after closing
hot water tap.

i

NOTE: up to 6 remote controls can be
programmed for one single water heater,
each with a range distance of 98 ft (30 m).

This manual is related to the following products: