Bad Boy Mowers BAD BOY 02.9812.0001C - Manual (Page 80)

B AD B OY ™ S POT L UMINAIRE U SER M ANUAL
7 0 02.9812.0001C
Replacing the Lamp
Parts:
71.2566.1200.0 1 EA LAMP, FASTFIT, PHILIPS MSR GOLD™
Tools and Supplies:
Cotton gloves or finger cots
WARNING: Remove power from luminaire before performing any maintenance procedures.
CAUTION: Refer to "Proper Lamp Servicing and Operation" on page 58 before handling the lamp.
To replace lamp:
Step 1. Remove power from lamp and allow lamp to cool for at least 5 minutes.
Step 2. Remove power from luminaire.
Step 3. At rear of luminaire, rotate backcap counter-clockwise to remove (it will still be connected
by a tether). Refer to Figure 4-8 on next page.
Step 4. Remove existing lamp by rotating lamp base counter-clockwise and pulling straight out of
backcap.
Step 5. Position new lamp as shown in Figure 4-8 DETAIL A and insert into rear bulkhead. Rotate
45 degrees clockwise to lock in place. You will hear a click when properly seated.
Step 6. Replace backcap.
Step 7. Reset Lamp Hours. (Refer to
"Lamp Screen" on page 34.)
Step 8. Optimize lamp. (Refer to "Adjusting the Lamp" on page 72.)