Bad Boy Mowers BAD BOY 02.9812.0001C - Manual (Page 43)

O PERATION : M ENU S YSTEM
0 2. 9 8 1 2. 0 0 01 C 33
3
Menu Details
Home Screen
The Home screen consists of several sections (referred to here as "panels") which provide status and
configuration information. Pressing the panels on the touchscreen will open the applicable sub-menus.
LAMP Panel
•
Lamp Status - displays lamp on/off status, hours, temperature
and power level. The lamp icon color indicates status of lamp: off
= gray icon, on = yellow icon (shown in example at right), error =
red icon.
• Power Level - displays current APS command: 700-1400 watt.
• Lamp Hours - displays total lamp hours. Lamp hours are shown
in green if under threshold, yellow at 750 hours, and red at 900
hours. It is mandatory that the lamp be changed before 900
hours.
• Temperature - displays luminaire head temperature. The
temperature is shown in green if under limit, yellow if close to
the limit, and red if over the limit.
Press panel to open Lamp Screen .
CONFIG Panel
•
Address - displays current DMX512 address 001-470.
• Universe - displays current Art-Net universe (alpha A-JE or numeric 0-255), if Art-Net is present.
Press panel to open Configuration Screen .
INFO Panel
•
Run Time - displays current run time in hours:minutes format.
Press panel to open Information Screen .
TEST Panel
Press panel to open
Test Screen .
COMM Panel
•
Comm - displays currently active input protocol: ETH (green), DMX (green) or NONE (red).
Press panel to open Communication Screen .
STATUS Panel
•
Status - displays fixture status: CAL (yellow), OK (green), or ERR (red).
Press panel to open Status Screen .
Home Screen