Bad Boy Mowers BAD BOY 02.9812.0001C - Manual (Page 24)

B AD B OY ™ S POT L UMINAIRE U SER M ANUAL
1 4 02.9812.0001C
Figure 2-3: Hanging Bracket Orientations
Standard Hang
WARNING: The luminaire is heavy. Use caution when lifting.
WARNING: Two safety cables and at least two truss hooks should be used in all hang configurations.
To install in standard 2-point hang:
Step 1. Unpack case and attach Hanging
Brackets. Refer to "Unpacking and
Attaching Hanging Brackets" on
page 13.
Step 2. Roll case to mounting location as
required ( Figure 2-4 ).
Step 3. Using two people, carefully lift
luminaire into mounting position.
Step 4. Secure in place by tightening Truss
Hook wing bolts ( Figure 2-5 ).
Ensure that luminaire is fully
supported.
Step 5. Feed safety cables through
mounting bracket slots and secure
around pipe as shown in
Figure 2-5 .
3-Point Hang * 2-Point Hang
* Requires three brackets.
Truss Pipe
Figure 2-4: Removing Luminaire From Case