Nokia 7160 - Manual (Page 104)

[ 93 ]
Network settings
Send own caller ID when calling
This feature allows you to block caller ID when you call someone (your
number will not be displayed on their caller ID). This feature works on a
per-call basis. Contact your service provider for more details.
This feature is only effective when calling to a number that is equipped
with Caller ID.
Before you can use this service, you must store the feature code in your
phone. See “Storing the feature code” on page 91. Make sure to store the
code in the No option.
Blocking your own caller ID
1. Press Menu 4-5-6 (Settings - Network services - Send own caller
ID when calling), and press Select.
2. Scroll to No (to block number) and press OK.
3. Enter the number you wish to call (or press Find to retrieve the
number from the phone book and press OK), then press Select.
4. Your phone will attempt to call this number with the feature code you
stored in Menu 4-5-6.
Call mode
In certain wireless networks, the Call mode submenu option may be
visible under the Settings - Network services menu. The following Call
mode options are available:
• Analog - the phone uses an analog channel to place the call. If an
analog channel is not available, the call may still be placed using a
digital channel. This feature depends on your network.
• Digital - the phone uses a digital channel to place the call. If a digital
channel is not available, the call may still be placed using an analog
channel. This feature depends on your network.
• Analog & digital - the phone uses both digital and analog channels.