Nokia E66 - Manual (Page 24)

Data is being transmitted using Bluetooth
connectivity. When the indicator is blinking, your
device is trying to connect with another device.
An infrared connection is active. If the indicator
blinks, your device is trying to connect to the other
device, or the connection has been lost.
A GPRS packet data connection is available (network
service). If the icon is , the connection is active. If
the icon is , the connection is on hold.
An EGPRS packet data connection is available
(network service). If the icon is , the connection is
active. If the icon is , the connection is on hold.
A UMTS packet data connection is available (network
service). If the icon is , the connection is active. If
the icon is , the connection is on hold.
High-speed downlink packet access (HSDPA) is
supported and available (network service). The icon
may vary between regions. If the icon is , the
connection is active. If the icon is , the connection
is on hold.
You have set the device to scan for WLANs, and a
WLAN is available.
A WLAN connection is active in a network that does
not have encryption.
A WLAN connection is active in a network that has
encryption.
Your device is connected to a computer with a USB
data cable.
The second phone line is being used (network
service).
All calls are forwarded to another number. If you
have two phone lines, a number indicates the active
line.
A headset is connected to the device.
The connection to a headset with Bluetooth
connectivity has been lost.
A hands-free car kit is connected to the device.
A loopset is connected to the device.
A text phone is connected to the device.
Your device is synchronising.
You have an ongoing push-to-talk connection.
Your push-to-talk connection is in the do not disturb
mode, because the ringing type setting of your
device is set to Beep once or Silent , or you have an
incoming or ongoing phone call. In this mode, you
cannot make PTT calls.
© 2010 Nokia. All rights reserved. 24