Switch the phone on and off – Nokia 6282 User Manual
Page 16
G e t s t a r t e d
15
1. Connect the charger to a wall socket.
2. Connect the lead from the charger
to the charging adapter (1), and the
adapter to the socket on the bottom
of your phone (2).
If the battery is completely discharged, it
may take a few minutes before the charging indicator appears on the
display or before any calls can be made.
The charging time depends on the charger and the battery charge.
■ Switch the phone on and off
Warning: Do not switch the phone on when wireless phone use is
prohibited or when it may cause interference or danger.
Press and hold the power key as shown.
If the phone asks for a PIN or UPIN code, enter
the code, and select
OK
.
You can switch on the phone in demo mode
without a SmartChip inserted. In this mode all
bearer-independent features are available, for
example, you can make emergency calls.
Plug and play service
When you switch on your phone for the first time,
and the phone is in the standby mode, you may be
asked to get the configuration settings from your
service provider (network service). Confirm or decline the query.
See
Connect to serv. support
in “Configuration,” p. 71 and