Nokia X6-00 16GB - Manual (Page 176)

Delete a server profile
Select Options > Delete .
Security settings
Phone and SIM
Select Menu > Settings and Phone > Phone mgmt. > Security > Phone and SIM
card .
Select from the following:
PIN code request — When active, the code is requested each time the device is
switched on. Deactivating the PIN code request may not be allowed by some SIM
cards.
PIN code and PIN2 code — Change the PIN and PIN2 code. These codes can only
include numbers. Avoid using access codes similar to the emergency numbers to
prevent accidental dialing of the emergency number. If you forget the PIN or PIN2
code, contact your service provider. If you forget the lock code, contact a Nokia Care
point or your service provider.
Lock code — The lock code is used to unlock the device. To avoid unauthorised use
of your device, change the lock code. The preset code is 12345. The new code can
be 4-255 characters long. Alphanumeric characters and both uppercase and
lowercase characters can be used. The device notifies you if the lock code is not
properly formatted. Keep the new code secret and separate from your device.
Phone autolock period — To avoid unauthorized use, you can set a time-out after
which the device automatically locks. A locked device cannot be used until the
correct lock code is entered. To turn off autolock, select None .
Lock if SIM card changed — Set the device to ask for the lock code when an
unknown SIM card is inserted into your device. The device maintains a list of SIM
cards that are recognized as the owner’s cards.
Remote phone locking — Enable or disable remote lock.
Closed user group — Specify a group of people to whom you can call and who can
call you (network service).
176 Settings