In "call settings," p. 73, Call settings, Usb data cable – Nokia 6555 User Manual
Page 74
S e t t i n g s
73
To start the synchronization from your phone, select
Menu
>
Settings
>
Connectivity
>
Data transfer
>
Server sync
. Depending on the settings,
select
Initialising syn-chronisation
or
Initialising copy
.
Synchronizing for the first time or after an interrupted synchronization may take
up to 30 minutes to complete.
USB data cable
You can use the CA-101 USB data cable to transfer data between the phone and
a compatible PC. You can also use the USB data cable with Nokia PC Suite.
To activate the phone for data transfer or image printing, connect the data cable.
Confirm
USB data cable connected. Select mode.
and select from the
following options:
Nokia mode
— to use the phone to interact with applications on a PC that has
Nokia PC Suite
Music sync
— to connect the phone to a PC to synchronize it with Windows
Media Player (music, video)
Data storage
— to connect to a PC that does not have Nokia software and use the
phone as a data storage
To change the USB mode, select
Menu
>
Settings
>
Connectivity
>
USB data
cable
>
Nokia mode
,
Music sync
, or
Data storage
.
■ Call settings
Select
Menu
>
Settings
>
Call
settings and from the following options:
Call forwarding
— to forward your incoming calls (network service). You may not
be able to forward your calls if some call restriction functions are active. See
Call
restrictions
Anykey answer
>
On
— to answer an incoming call by briefly pressing any key, except
the power key, the camera key, the left and right selection keys, or the end key
Automatic redial
>
On
— to make a maximum of 10 attempts to connect the call
after an unsuccessful call attempt
Speed dialing
>
On
— to dial the names and phone numbers assigned to the
speed-dialing keys 2 to 9 by pressing and holding the corresponding number key
Call waiting
>
Activate
— to have the network notify you of an incoming call
while you have a call in progress (network service). See "Call waiting," p. 24.
Summary after call
>
On
— to briefly display the approximate duration and cost
(network service) of the call after each call