Nokia 6555 - Manual (Page 72)

S e t t i n g s
71
Bluetooth wireless connection
Select Menu > Settings > Connectivity > Bluetooth . To check which Bluetooth
connection is currently active, select Active devices . To view a list of Bluetooth
devices that are currently paired with the phone, select Paired devices .
Bluetooth settings
To define how your phone is shown to other Bluetooth devices, select Menu >
Settings > Connectivity > Bluetooth > My phone's visibility or My phone's name .
If you are concerned about security, turn off the Bluetooth function, or select
My phone's visibility > Hidden . Always accept only Bluetooth communication
from others with whom you agree.
Packet data
General packet radio service (GPRS) or 3G are network services that allow mobile
phones to send and receive data over an internet protocol (IP)-based network.
To define how to use the service, select Menu > Settings > Connectivity > Packet
data > Packet data conn. and from the following options:
When needed — to set the packet data connection to established when an
application needs it. The connection is closed when the application is terminated.
Always online — to set the phone to automatically connect to a packet data
network when you switch the phone on
Modem settings
You can connect the phone using Bluetooth wireless technology or USB data
cable connection to a compatible PC and use the phone as a modem to enable
GPRS 0r 3G connectivity from the PC.
To define the settings for connections from your PC, select Menu > Settings >
Connectivity > Packet data > Packet data settings > Active access point , and
activate the access point you want to use. Select Edit active access pt. > Packet
data acc. pt. , enter a name to change the access point settings, and select OK .
Select Packet data acc. pt. , enter the access point name (APN) to establish a
connection to an network, and select OK .
You can also set the EGPRS dial-up service settings (access point name) on your
PC using the Nokia Modem Options software. See "Nokia PC Suite," p. 77. If you
have set the settings both on your PC and on your phone, the PC settings are used.