Loopset profile – Nokia 3595 User Manual

Page 62

Nokia 3595 User Guide

Personalize your phone

AUTOMATIC ANSWER

This profile lets your phone answer incoming calls after just one ring.

Place the phone into the car kit holder.

Select Menu > Settings > Accessory settings > Handsfree > Automatic
answer > On.

LIGHTS

If you are using your phone with a compatible Nokia car kit, you can set lights to
On (display and keypad lights stay on) or Automatic (after 15 seconds, lights turn
off until the next key is pressed or the phone rings).

Place the phone into the car kit holder.

Select Menu > Settings > Accessory settings > Handsfree > Lights > On
or Automatic.

Loopset profile

The LPS-3 loopset gives people with T-coil equipped hearing aids the ability to
make and receive calls without noise interference.

Important: Refer to the booklet that comes with the LPS-3 for complete
instructions and safety information.

Plug the loopset plug into the jack in the
bottom of the phone, as shown in the
illustration.

Select Menu > Settings > Accessory
settings > Loopset.

Select Use loopset > Yes.

Note: If you want to use the headset or
TTY/TDD, you perform steps 2—3, then
select No to deactivate the loopset profile.