Nokia 2125i - Manual (Page 50)

S e t t i n g s
49
Automatic A scans the channels in the A side of the frequency band first, then
the B side. Automatic B scans the B side of the frequency band first, then the
A side. The roaming rate applies when your are not in the home service area.
2. Select OK , if necessary, to confirm the activation.
Note: Your wireless service provider may have different roaming options.
Contact your service provider for more information.
Mode
You can choose whether your phone uses digital or analog service. Your wireless
service provider may offer some or all of the following service options.
In the standby mode, select Menu > Settings > Network > Mode and one of the
following options:
Digital pref. —The phone works in digital mode but will also work in analog mode
when digital mode is unavailable.
Digital only —The phone only works in digital mode.
Analog per call —Allows the phone to operate in analog mode for a few minutes.
After an analog call, the phone searches for a digital signal again.
Analog only —The phone only works in analog mode.
IS-95 per call —Allows calls on the IS-95 network. If no calls are placed ten
minutes after IS-95 selection, calls return to the previous network selection.
■ Network services
The following features are network services. See "Network services," p. 5.
Store a feature code
1. In the standby mode, select Menu > Settings > Network services >
Network feature setting .
2. Enter the feature code from your service provider (for example, *633
Forward if busy ), and select OK .
3. Select the type of forwarding that matches the feature code you entered
(for example, Call forwarding ).
The activated feature code is now stored in your phone, and you are returned to
the
Feature code: field. Continue entering other feature codes (for example, *633),
or press the end key to return to standby mode. Once you enter a network feature
code successfully, the feature becomes visible in the
Network services menu.