Nokia 2125i - Manual (Page 55)

V o i c e
54
Voice tags
After you have associated a voice tag to a contact, in the standby mode, select
Menu > Voice > Voice tags > Options > Playback , Change , or Delete .
■ Voice commands
Set as many as five voice commands, to allow hands-free operation of certain
phone features.
Assign a voice tag to a command
Before using voice commands, you must first add a voice tag to the phone function.
1. In the standby mode, select Menu > Voice > Voice commands .
2. Select the phone function you wish to tag: Profiles , Voice mailbox , Voice
recorder or Call log .
3. If necessary, select an option associated with that function, and Options >
Add command .
4. Select Start , and speak the voice tag clearly into the microphone. Do not
select Quit unless you want to cancel the recording.
The phone replays and saves the recorded tag. appears next to commands
that have voice tags assigned.
Activate a voice command
After you have associated a voice tag with a phone function, you can issue a
command by speaking the voice tag.
1. Select and hold Contacts .
2. When Speak now appears, pronounce the voice tag clearly into the microphone.
When the phone finds the voice tag, Found: is displayed, and the phone plays the
recognized voice tag through the earpiece. The function you requested is activated.
Options
After you have associated a voice tag to a command, in the standby mode, select
Menu > Voice > Voice commands > Options > Playback , Change , or Delete .