Still image camera settings, Setup settings—adjust colour and lighting, Setup settings—adjust colour and – Nokia N95 User Manual
Page 53: Lighting", p. 53, Oolbar, See "setup settings, Adjust colour and lighting", p. 53, To chang, Ca mera
Still image camera settings
To change the main settings, in the image mode, select
Options
>
Settings
and from the following:
●
Image quality
— Select
Print 5M - Large
(2592x1944 resolution),
Print 3M - Medium
(2048x1536 resolution),
Print 2M - Medium
(1600x1200 resolution),
E-mail 0.8M - Med.
(1024x768 resolution), or
MMS 0.3M - Small
(640x480 resolution). The better the image quality,
the more memory the image consumes. If you want
to print the image, select
Print 5M - Large
,
Print 3M
- Medium
, or
Print 2M - Medium
. If you want to
send it using e-mail, select
E-mail 0.8M - Med.
. To
send the image using a multimedia message, select
MMS 0.3M - Small
.
These resolutions are only available in the main
camera.
●
Add to album
— Select whether you want to save
the image to a certain album in Gallery. If you select
Yes
, a list of available albums opens.
●
Show captured image
— Select
On
if you want to
see the captured image after it is taken or
Off
if you
want to continue taking pictures immediately.
●
Default image name
— Define the default name
for the captured images.
●
Extended digital zoom
(main camera only) —
On
(continuous)
allows the zoom increments to be
smooth and continuous between digital and
extended digital zoom,
On (paused)
allows the
zoom increments to pause at the digital and
extended digital step point, and
Off
allows a limited
amount of zoom while retaining the image
resolution.
●
Capture tone
— Select the tone you want to hear
when you take a picture.
●
Memory in use
— Select where you want to store
your images.
●
Rotate image
— Select whether you want images
that are captured when the device is held upright to
be rotated when you open them in Gallery.
●
Restore camera settings
— Select
Yes
to return
the default values to the camera settings.
Setup settings—adjust colour and
lighting
To enable the camera to reproduce colours and lighting
more accurately or to add effects to your pictures or
videos, scroll through the active toolbar, and select
from the following options:
●
Flash mode
( ) (images only) — Select the desired
flash mode.
●
Colour tone
( ) — Select a colour effect from the
list.
●
White balance
( ) — Select the current lighting
condition from the list. This allows the camera to
reproduce colours more accurately.
53
Ca
mera