Nokia N95 - Manual (Page 29)

be in direct line-of-sight. However, they must be within
10 metres (33 feet) of each other, although the
connection may be subject to interference from
obstructions such as walls or from other electronic
devices.
This device is compliant with Bluetooth Specification
2.0 supporting the following profiles: Advanced Audio
Distribution Profile, Audio/Video Remote Control
Profile, Basic Imaging Profile, Basic Printing Profile,
Dial-up Networking Profile, File Transfer Profile, Hands-
Free Profile, Headset Profile, Human Interface Device
Profile, Object Push Profile, SIM Access Profile, and
Synchronization Profile. To ensure interoperability
between other devices supporting Bluetooth
technology, use Nokia approved enhancements for this
model. Check with the manufacturers of other devices
to determine their compatibility with this device.
There may be restrictions on using Bluetooth
technology in some locations. Check with your local
authorities or service provider.
Features using Bluetooth technology, or allowing such
features to run in the background while using other
features, increase the demand on battery power and
reduce the battery life.
When the device is locked, you cannot use Bluetooth
connectivity. See "Phone and SIM", p. 95.
Settings
Press , and select Tools > Bluetooth .
When you open the application for the first time, you
are asked to define a name for your device. You can
change the name later on.
Select from the following:
● Bluetooth — To make a wireless connection to
another compatible device, first set Bluetooth
connectivity On , then establish a connection. To
switch off Bluetooth connectivity, select Off .
● My phone's visibility — To allow your device to be
found by other devices with Bluetooth wireless
technology, select Shown to all . To set a time after
which the visibility is set from shown to hidden,
select Define period . To hide your device from
other devices, select Hidden .
● My phone's name — Edit the name shown to other
devices with Bluetooth wireless technology.
● Remote SIM mode — To enable another device,
such as a compatible car kit enhancement, to use
the SIM card in your device to connect to the
network, select On .
Security tips
Press , and select Tools > Bluetooth .
When you are not using Bluetooth connectivity, to
control who can find your device and connect to it,
29
Con
nectio
ns