Nokia N810 - Manual (Page 14)

Your device
14
Device lock
To prevent unauthorized use of your device, change the
lock code, and set the device to automatically lock after a
certain time-out period.
To lock the device, briefly press the power key, select
Lock device > OK . If you have not set the lock code, you
are asked to do so. To unlock the device, enter the lock
code, and select
OK .
To edit the device lock settings, tap , and select
Settings > Control panel . In Control panel , select
Device lock .
To set the time-out period, select Autolock period and
the desired time.
Change lock code
To change the lock code, do the following:
1. Tap , and select Settings > Control panel .
2. In Control panel , select Device lock >
Change lock code .
3. Enter the current lock code, and select OK . The default
code is 12345.
4. Enter the new code, and select OK .
5. Enter the new code again, and select OK .
If you select Cancel in any of these dialogs, the device
lock code is not changed.
Keep the new code secret and in a safe place separate
from your device.
Note: If you lose the device lock code, you
must take the device to a Nokia authorized
service facility. To unlock the device, the
software must be reloaded, and all data you
have saved in the device may be lost.
Lock touch screen and keys
The touch screen and key lock prevents accidental operation
of the device when it is switched on. When the touch
screen and keys are locked, the device plays no key tones
and accepts no keypresses except for unlocking the touch
screen and keys.
Depending on the product model, the procedure for locking
and unlocking the touch screen and keys can vary:
Nokia N800 Internet Tablet—To lock the touch screen
and keys, briefly press
, and select Lock touch screen
and keys > OK . To unlock the touch screen and keys, press
and .
Nokia N810 Internet Tablet—To lock the touch screen
and keys, push
to the left. To unlock the touch screen
and keys, push to the left again.