Nokia 1261 - Manual (Page 87)

[ 80 ]
Answer a call while Keyguard is active
You can answer calls when Keyguard is activated by pressing Answer or
. If you are connected to a headset or loopset, press and hold to
end the call.
NOTES ABOUT KEYGUARD
•
After you end the call, Keyguard automatically becomes active again.
• If you need the phone’s lights while Keyguard is on, press the Power
key to quickly switch the lights on for 15 seconds.
• Connecting your phone to a car kit automatically disables Keyguard.
• UNDERSTAND THE SECURITY CODE
The Security code prevents unauthorized users from changing certain
important feature settings on your phone. When the phone requires this
code, it displays a prompt asking you to enter a Security code. The five-digit
default Security code that comes with your phone is 12345. Nokia
recommends that you change the default code immediately.
Note: If you enter an incorrect security code five times in a row,
the phone will not accept the correct code for 5 minutes.
Change your security code
1 Press Menu 4-5-2 (Menu > Settings > Security settings > Change
security code).
2 At the Security code prompt, enter your five-digit default security
code (12345) or your current security code and press OK.
3 At the Enter new security code prompt, enter your new five-digit
security code and press OK.
4 At the Verify new security code prompt, enter your new security code
again and press OK. The confirmation Security code changed appears.
Keep your security code secret and stored in a safe place away from your
phone. If you have changed your security code and don’t remember the
new code, contact your service provider.